Hello Sharon,

Here’s what the experts had to say about your question:

Sometimes you don’t get the best room to get leverage on the wrench where the filter is installed. You might have to disconnect the water lines to the filter housing and take it out and then try the wrench. The only way for the housing to open is by turning it with the wrench. Make sure to push the handle to the left, counter clockwise from the base. These can be very stubborn sometimes but with enough force should open.

Sincerely,
Dan
RV Repair Club Technical Expert

Hi Rose,

I will need the make, model, and year of your RV to submit your question to our experts.

Thank you!

Hello Frances,

Here’s what the experts had to say about your question:
If you are looking for all around general knowledge of the RV I would recommend this instructional video collection:https://www.rvrepairclub.com/product/the-complete-rv-maintenance-collection/

If you are looking for specific component help I would be glad to assist. Just let me know what you are having trouble with and I will be glad to help the best I can.

Sincerely,
Dan
RV Repair Club Technical Expert

Hi Tom,
If you just need to get rid of the sanitize smell you will want to flush the system. You just need to fill the fresh tank with water and then run it out of the lines and drains until the smell is gone. It shouldn’t take too long for the smell to go away, usually a few minutes of water flow.

Dan
RV Repair Club Expert