As you remodel and upgrade your camper (or your house) you’re going to run into scenarios where small nails get left behind. Nails and staples that hold molding on are a great example. When you remove the molding or trim the fastener is commonly left stuck in the wall. Nail pulling pliers are great for removing these small fasteners. You really need a pair of these in your toolbox.
You Might Also Enjoy
-
2:39Amp Draw Difference between LED and Incandescent Bulbs
If you want to compare the benefits of LED and incandescent bulbs, this is the video to watch. You’ll find out why LED lights draw less from your battery while providing the same amount – or even more — light than the old incandescent ones. This video takes you step-by-step to quantify the amp draw…
Watch Now >> -
8:07Convert to RV LED Replacement Bulbs for a Brighter Space
Making the switch to LED lights can make your RV feel much more open and bright. There are a variety of LED replacement bulbs on the market; therefore, it’s important to research the differences. The more expensive RV LED replacement bulbs are made with an aluminum cage in-between the chips rather than fiberboard. This helps…
Watch Now >> -
12:08RV Kitchen Faucet Replacement Instructions
The vibration from being on the road can loosen even the most secure fittings, making it easy for dirt and foreign objects to get underneath the faceplate of your kitchen faucet. This is just one of the many reasons you might need to replace this basic fixture. Doing your own kitchen plumbing might seem like…
Watch Now >> -
8:18Simple RV Battery Maintenance to Keep Them Going Longer
Your RV batteries have two jobs: The automotive battery to start and run the RV engine when you’re on the road, and the Deep Cycle house batteries to run the lights and appliances when you’re using your RV as a home instead of as a vehicle. In both cases, it’s clear just how important the batteries are to your RV life enjoyment. Keep up with RV battery maintenance is the simplest way to make sure you have power to make your coffee every morning, while still being able to start the motor and get you on the road when it’s time to move on.
Like many maintenance jobs, RV battery maintenance may seem like a thankless job that really isn’t needed as often as recommended, but this is one case where you get what you pay for, so to speak. Batteries terminals and connections can corrode in a matter of weeks, and a corroded connection reduces the recharging capabilities of your batteries. When batteries sit in an uncharged state they will not only provide less power, they begin to sulfate. Sulfation is the number one killer of RV batteries.
In this video, you’ll learn the simple techniques for doing a basic RV battery maintenance session. You’ll see how to remove loose corrosion powder from the outside of the battery, and what corroded posts look like when they need care. Find out what comes in a battery maintenance kit and why you need to have every item in there. You’ll see safety tips on the correct way to remove and attach battery cables, as well as hints on preventing damage from battery acid splashes. From visual inspections to using battery post protector, you’ll learn all the steps to RV battery maintenance here.
Watch Now >>
